H07RN-F ECA
Rubber cables
Flexible red copper-
certificates
-
Appliances Cables
Conditions of employment
Use in industrial and agricultural workshops, building sites, for heavy duty applications and supplying industrial and agricultural machines and appliances where cables are subject to medium mechanical stresses (e.g. heating plates, inspection lamps, electric tools such as drills, circular saws, and domestic electric tools) use in dry, humid or moist rooms; fixed installations e.g. on rough-cast in temporary buildings and huts for accommodation purposes.
Type of electrical conductor
Flexible red copper
Main rule
EN 50525-2-21
Conductor
EN 60228; IEC 60228
Self-extinguishing
EN 60332-1-2; IEC 60332-1-2
Oil resistance
EN 60811-404; IEC 60811-404
Description
Use in industrial and agricultural workshops, building sites, for heavy duty applications and supplying industrial and agricultural machines and appliances where cables are subject to medium mechanical stresses (e.g. heating plates, inspection lamps, electric tools such as drills, circular saws, and domestic electric tools) use in dry, humid or moist rooms; fixed installations e.g. on rough-cast in temporary buildings and huts for accommodation purposes.
Type of electrical conductor
Flexible red copper
Main rule
EN 50525-2-21
Conductor
EN 60228; IEC 60228
Self-extinguishing
EN 60332-1-2; IEC 60332-1-2
Oil resistance
EN 60811-404; IEC 60811-404
Description
Flexible single and multicore power cables, rubber insulated, under heavy polychloroprene sheath or other equivalent elastomer sheath.
More informations
Review number | n. 0 - 23/2/2018 |
Nominal tension | 450/750 V |
Type of insulation | EI4 |
Type of outer sheath | EM2 |
Color of the outer sheath | Black |
Operating temperature | -25° C | +60° C |
Short circuit temperature | 200° C on the conductor (max 5 sec.) |
Test voltage | 2500 V |
Cable marking | ELETTRO BRESCIA IEMMEQU <HAR> H07RN-F |
Minimum radius of curvature | If the outer diameter of the cable is between 8 and 12 mm: 4 times the max. outer diameter in case of non-constrained motion, and 3 times in case of fixed installation. If the outer diameter is greater than 12 mm: 5 times the max. outer diameter in case of non- constrained motion and 4 times in case of fixed instalIation. |
Insulation tolerance | ± 0,1 |
Sheath tolerance | ± 0,2 |
Insulation identification
number of cores | Insulation identification sequence |
3.00 | Yellow/Green-Blue-Brown |
2.00 | Blue-Brown |
4.00 | Yellow/Green-Blue-Brown-Black / Yellow/Green-Brown-Black-Grey |
5.00 | Yellow/Green-Blue-Brown-Black-Grey |
Sections
The manufacturer reserves the right to modify all or part of the data shown in this catalogNominal section | Max wire diameter | Conductor diameter | Insulation thickness | Average sheath thickness | Minimum external diameter | Maximum external diameter | Copper electric resistance 20°C | Indicative weight | CU Factor |
(Nxmm2) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (Ω/km) | (kg/km) | (kg/km) |
2x1,00 | 0,21 | 1,215 | 0,80 | 1,30 | 7,7 | 10,0 | 19,50 | 115 | 19,2 |
2x1,50 | 0,26 | 1,435 | 0,80 | 1,50 | 8,5 | 11,0 | 13,30 | 140 | 28,8 |
2x2,50 | 0,26 | 1,879 | 0,90 | 1,70 | 10,2 | 13,1 | 7,98 | 200 | 48 |
2x4,00 | 0,31 | 2,445 | 1,00 | 1,80 | 11,8 | 15,1 | 4,95 | 275 | 76,8 |
2x6,00 | 0,31 | 2,955 | 1,00 | 2,00 | 13,1 | 16,8 | 3,30 | 365 | 115,2 |
3G1,00 | 0,21 | 1,215 | 0,80 | 1,40 | 8,3 | 10,7 | 19,50 | 135 | 28,8 |
3G1,50 | 0,26 | 1,435 | 0,80 | 1,60 | 9,2 | 11,9 | 13,30 | 170 | 43,2 |
3G2,50 | 0,26 | 1,879 | 0,90 | 1,80 | 10,9 | 14,0 | 7,98 | 240 | 72 |
3G4,00 | 0,31 | 2,445 | 1,00 | 1,90 | 12,7 | 16,2 | 4,95 | 335 | 115,2 |
3G6,00 | 0,31 | 2,955 | 1,00 | 2,10 | 14,1 | 18,0 | 3,30 | 445 | 172,8 |
4G1,00 | 0,21 | 1,215 | 0,80 | 1,50 | 9,2 | 11,9 | 19,50 | 165 | 38,4 |
4G1,50 | 0,26 | 1,435 | 0,80 | 1,70 | 10,2 | 13,1 | 13,30 | 205 | 57,6 |
4G2,50 | 0,26 | 1,879 | 0,90 | 1,90 | 12,1 | 15,5 | 7,98 | 290 | 96 |
4G4,00 | 0,31 | 2,445 | 1,00 | 2,00 | 14,0 | 17,9 | 4,95 | 420 | 153,6 |
4G6,00 | 0,31 | 2,955 | 1,00 | 2,30 | 15,7 | 20,0 | 3,30 | 565 | 230,4 |
5G1,00 | 0,21 | 1,215 | 0,80 | 1,60 | 10,2 | 13,1 | 19,50 | 205 | 48 |
5G1,50 | 0,26 | 1,435 | 0,80 | 1,80 | 11,2 | 14,4 | 13,30 | 255 | 72 |
5G2,50 | 0,26 | 1,879 | 0,90 | 2,00 | 13,3 | 17,0 | 7,98 | 360 | 120 |
5G4,00 | 0,31 | 2,445 | 1,00 | 2,20 | 15,6 | 19,9 | 4,95 | 520 | 192 |
5G6,00 | 0,31 | 2,955 | 1,00 | 2,50 | 17,5 | 22,2 | 3,30 | 695 | 288 |