N2GFA (N)2GFA
Silicone cables
Solid tinned copper-
certificates
-
Appliances Cables
Conditions of employment
Highly resistant to heath, flexibility, excellent mechanical resistance. Suitable for harnesses for electric and electronic equipment, lighting equipment, lamp holders and in all other sectors where good technical characteristics are required and high safety standards.
Type of electrical conductor
Solid tinned copper
Main rule
VDE 0250 TEIL 502
Description
Highly resistant to heath, flexibility, excellent mechanical resistance. Suitable for harnesses for electric and electronic equipment, lighting equipment, lamp holders and in all other sectors where good technical characteristics are required and high safety standards.
Type of electrical conductor
Solid tinned copper
Main rule
VDE 0250 TEIL 502
Description
Solid single core cable with a silicone rubber insulating sheath.
More informations
Review number | n. 5 - 30/4/2011 |
Nominal tension | 300/300 V |
Type of insulation | EI2 |
Operating temperature | -60° C | +180° C |
Short circuit temperature | 350° C on the conductor (max 5 sec.) |
Test voltage | 2000 V |
Cable marking | ELETTRO BRESCIA <VDE> / ELETTRO BRESCIA <VDE> Reg. Nr. 7874 |
Insulation tolerance | ± 0,2 |
Sections
The manufacturer reserves the right to modify all or part of the data shown in this catalogNominal section | Max wire diameter | Conductor diameter | Insulation thickness | Average sheath thickness | Average diameter ± 0,2 | Copper electric resistance 20°C | Indicative weight | CU Factor |
(Nxmm2) | (mm) | (mm) | (mm) | (mm) | (mm) | (Ω/km) | (kg/km) | (kg/km) |
1x0,50 | 0,80 | 0,80 | 0,60 | NA | 2.1 | 36,70 | NA | 4,8 |
1x0,75 | 1,00 | 1,00 | 0,60 | NA | 2.3 | 24,80 | NA | 7,2 |
1x1,00 | 1,13 | 1,13 | 0,60 | NA | 2.4 | 18,20 | NA | 9,6 |
1x1,50 | 1,35 | 1,35 | 0,70 | NA | 2.9 | 12,20 | NA | 14,4 |
1x2,50 | 1,75 | 1,75 | 0,80 | NA | 3.5 | 7,56 | NA | 24 |